Mega Man RPG Prototype Community
.....Spriter?
August 27th, 2015 at 4:33am
Mikey76500
Mikey76500
0 BP
0 TP |
0 PP
As some people who are regulars of the MMRPG Chat may know, I'm in the process of making the first chapter of an RP*G* for the roleplay section. The running name for it is "Mega Man: Prototype Armageddon". It's basically an AU [alternate universe] story separate from Adrian's Prototype. Different storyline, different enemies, different friends, different moves, different battle formula, different surprises, and more.
I, for one, am sick of the excessive godmodding that goes on in the RP section, and I wanna post something there that will fix that; specifically, an RPG with clearly defined rules and boundaries, making it easier to spot trollers and godmodders, and therefore easier for staffers to put a halt to it. Hence, Armageddon.
I'm planning on having the first chapter done by the end of September at the very latest, and then, I'll test it with a few pre-chosen members to see if it works, and if it does, I'll publicize it for the RPG section to play.
As far ahead as I tried to plan for this, I didn't plan for the need of a spriter, due to the fact that this RPG will have characters of my own creation.
So, basically, I'm posting this 'help wanted' thread because I'm in need of someone [or someones] that can make high-quality single sprites [Not spriteSHEETS, single sprites]. By 'high-quality', I mean either custom-made from the ground up, or--at the very least--frankenedits that don't look like obvious frankenedits at a glance.
I'd REALLY like to avoid employing the help of anyone that either IS working with Adrian and Boss on the REAL Prototype or is PLANNING to work with Adrian and Boss on the REAL Prototype, since it would be EXTREMELY unfair to both them and to Prototype fans to take any resources away from it, though if I ever get Adrian's direct blessing for the person to sprite for Armageddon as well, all will be good.
I can also promise that sprites of the chosen spriter's creation will make it into Armageddon as optional bosses. I'll also promise that the chosen spriter will be one of the lucky few to test Chapters 0 and 1 of Armageddon before I make it public.
If you'd like to apply to be the spriter for Armageddon, please post some of your better works in this thread so that I may take a look.
There's no deadline, but, most likely, the sooner you post, the better your chances of being accepted.
Thanks in advance,
Mike.
I, for one, am sick of the excessive godmodding that goes on in the RP section, and I wanna post something there that will fix that; specifically, an RPG with clearly defined rules and boundaries, making it easier to spot trollers and godmodders, and therefore easier for staffers to put a halt to it. Hence, Armageddon.
I'm planning on having the first chapter done by the end of September at the very latest, and then, I'll test it with a few pre-chosen members to see if it works, and if it does, I'll publicize it for the RPG section to play.
As far ahead as I tried to plan for this, I didn't plan for the need of a spriter, due to the fact that this RPG will have characters of my own creation.
So, basically, I'm posting this 'help wanted' thread because I'm in need of someone [or someones] that can make high-quality single sprites [Not spriteSHEETS, single sprites]. By 'high-quality', I mean either custom-made from the ground up, or--at the very least--frankenedits that don't look like obvious frankenedits at a glance.
I'd REALLY like to avoid employing the help of anyone that either IS working with Adrian and Boss on the REAL Prototype or is PLANNING to work with Adrian and Boss on the REAL Prototype, since it would be EXTREMELY unfair to both them and to Prototype fans to take any resources away from it, though if I ever get Adrian's direct blessing for the person to sprite for Armageddon as well, all will be good.
I can also promise that sprites of the chosen spriter's creation will make it into Armageddon as optional bosses. I'll also promise that the chosen spriter will be one of the lucky few to test Chapters 0 and 1 of Armageddon before I make it public.
If you'd like to apply to be the spriter for Armageddon, please post some of your better works in this thread so that I may take a look.
There's no deadline, but, most likely, the sooner you post, the better your chances of being accepted.
Thanks in advance,
Mike.
.....Spriter?
Posted by Mikey76500 on August 27th, 2015 at 4:33am
Viewed 2188 Times
Posted by Mikey76500 on August 27th, 2015 at 4:33am
Viewed 2188 Times
Musical
Musical
15,225,883 BP
14 TP |
796 PP
Posted on August 28th, 2015 at 7:17pm
Edited on 2015/08/28 at 7:27pm
Posted 2015/08/28 at 7:17pm
Edited 2015/08/28 at 7:27pm
#1
Here's Threatre Man!
Tobyjoey
Contributor
Tobyjoey
151,500,697 BP
17 TP |
436 PP
Posted on August 28th, 2015 at 7:34pm
Posted 2015/08/28 at 7:34pm
#2
@MusicalKitty : He looks really cool with the 2 shades of gray on parallel sides, and the cape is neat. As one minor suggestion, wouldn't it be cool if half of his face was frowning and the other smiling, rather than both sides smiling? His face already seems to be based on the iconic happy and sad masks, so just food for thought.
Brimstone
Brimstone
2,970,700 BP
0 TP |
225 PP
Posted on August 28th, 2015 at 7:48pm
Posted 2015/08/28 at 7:48pm
#3
@ThatGuyNamedMikey : Define "that". If it's the fact that the sprite looks a bit like a Franken-edit, then that's a coincidence. xD
Mikey76500
Mikey76500
0 BP
0 TP |
0 PP
Posted on August 28th, 2015 at 8:07pm
Edited on 2015/08/28 at 8:09pm
Posted 2015/08/28 at 8:07pm
Edited 2015/08/28 at 8:09pm
#4
@MusicalKitty : ...not entirely sure that's in MM-classic style; his heads looking right at the 4th wall. :P
Try a smaller more, MM-Classic-based creation.
@Brimstone : "If we're all supposed to be using an 8-bit style here, then I'm pretty sure I may or may not have just went slightly out of it."
That. *points up*
8-bit MM-style is preferred, since Armageddon's visuals will be in said style, and I can more accurately judge the qualities of sprites that way.
Try a smaller more, MM-Classic-based creation.
@Brimstone : "If we're all supposed to be using an 8-bit style here, then I'm pretty sure I may or may not have just went slightly out of it."
That. *points up*
8-bit MM-style is preferred, since Armageddon's visuals will be in said style, and I can more accurately judge the qualities of sprites that way.
Tobyjoey
Contributor
Tobyjoey
151,500,697 BP
17 TP |
436 PP
Posted on August 28th, 2015 at 8:23pm
Edited on 2015/08/28 at 8:46pm
Posted 2015/08/28 at 8:23pm
Edited 2015/08/28 at 8:46pm
#5
As a secondary piece from my glamorous (hideous) collection, Sheriff Man, equipped with the Sheriff Shield!
Don't worry about how large these images are, by the way. They are simply up-scaled.
Don't worry about how large these images are, by the way. They are simply up-scaled.
DaCrashBomber
DaCrashBomber
12,905,103 BP
1 TP |
281 PP
Posted on August 28th, 2015 at 8:25pm
Posted 2015/08/28 at 8:25pm
#6
I could probably help. Maybe.
DWN-00C: Beetle Man (Fun fact: Every color on him is a color on the original NES pallete :D)
Metal Man Helmet On mode.
And Nova Man
All of which I made by scratch.
DWN-00C: Beetle Man (Fun fact: Every color on him is a color on the original NES pallete :D)
Metal Man Helmet On mode.
And Nova Man
All of which I made by scratch.
matthewftw123
matthewftw123
3,633,250 BP
13 TP |
155 PP
Posted on August 28th, 2015 at 8:25pm
Edited on 2015/08/28 at 8:45pm
Posted 2015/08/28 at 8:25pm
Edited 2015/08/28 at 8:45pm
#7
well heres the gadget man but hes really more of a recolor so far
but im planning to take off his lightbulb and replace it with something
or even... well im not sure yet but here he is
again dont judge him just yet!
hes not done
dont judge the unfinished product for a full one!
but im planning to take off his lightbulb and replace it with something
or even... well im not sure yet but here he is
again dont judge him just yet!
hes not done
dont judge the unfinished product for a full one!
Brimstone
Brimstone
2,970,700 BP
0 TP |
225 PP
Posted on August 28th, 2015 at 11:52pm
Posted 2015/08/28 at 11:52pm
#8
Just as something random, here be knights and Halberd Man.
Mikey76500
Mikey76500
0 BP
0 TP |
0 PP
Posted on August 29th, 2015 at 12:58am
Posted 2015/08/29 at 12:58am
#9
@Tobyjoey : Were it not for directly facing the 4th wall, I'd say that this is as good as Swamp. One more? Please?
@DaCrashBomber : You made all 3 of those? They look pretty darn good, if I'm totally honest. Do you have any more?
@matthewftw123 : The whole point of the thread is for you to showcase your best works, Matthew, so, try to refrain from posting things you haven't finished, yet, pleaseandthankyou.
@Brimstone : Halberd is pretty impressive, actually. Not shabby at all. Post more if you have any.
Also--and I just edited this part into the opening post--I can't accept you if you wish to work alongside Adrian and Boss in the REAL Prototype, unless and until I have Adrian's DIRECT blessing for you to work with me on Armageddon. As I've stated in the opening post, it would be unfair to Adrian, Boss, and all of Prototype's fans for me to take valuable resources away from it for any reason.
Nothing personal, but, I can't do that to Adrian; he has a hard enough time with Prototype as it is without me taking things from it.
@DaCrashBomber : You made all 3 of those? They look pretty darn good, if I'm totally honest. Do you have any more?
@matthewftw123 : The whole point of the thread is for you to showcase your best works, Matthew, so, try to refrain from posting things you haven't finished, yet, pleaseandthankyou.
@Brimstone : Halberd is pretty impressive, actually. Not shabby at all. Post more if you have any.
Also--and I just edited this part into the opening post--I can't accept you if you wish to work alongside Adrian and Boss in the REAL Prototype, unless and until I have Adrian's DIRECT blessing for you to work with me on Armageddon. As I've stated in the opening post, it would be unfair to Adrian, Boss, and all of Prototype's fans for me to take valuable resources away from it for any reason.
Nothing personal, but, I can't do that to Adrian; he has a hard enough time with Prototype as it is without me taking things from it.
matthewftw123
matthewftw123
3,633,250 BP
13 TP |
155 PP
Posted on August 29th, 2015 at 9:40pm
Posted 2015/08/29 at 9:40pm
#10
@ThatGuyNamedMikey : sorry im kinda new to spriting
and if it was my best works... it wouldnt exactly be anything other than a recolor
and if it was my best works... it wouldnt exactly be anything other than a recolor
TheDoc
TheDoc
12,484,029 BP
3 TP |
717 PP
Posted on August 29th, 2015 at 10:45pm
Posted 2015/08/29 at 10:45pm
#11
Bit late, but this belongs in the Roleplay section; even if the thread in question isn't hosting the RP itself, it's still very much related.
Tobyjoey
Contributor
Tobyjoey
151,500,697 BP
17 TP |
436 PP
Posted on August 30th, 2015 at 6:15pm
Edited on 2015/08/30 at 6:18pm
Posted 2015/08/30 at 6:15pm
Edited 2015/08/30 at 6:18pm
#12
I would make a pun about striking out, but I think the actual Strike Man would have me sent flying, so instead, here is a classic series robot master based off of the Net Navi BowlMan.exe, Bowling Man!
Mikey76500
Mikey76500
0 BP
0 TP |
0 PP
Posted on August 30th, 2015 at 11:11pm
Edited on 2015/08/30 at 11:22pm
Posted 2015/08/30 at 11:11pm
Edited 2015/08/30 at 11:22pm
#13
@matthewftw123 : Can't fault you for that. Thanks for trying, anyway, though.
@TheDoc : Ah, HERE it is. I was wondering where this went. Since there's no actual RPing done in this thread, I figured it'd be best left in the General section. :P
It was a borderline thing, so I thought. Sorry. x)
@Tobyjoey : You know I'm gonna call it Bowl Man, right? xD
I do wonder how he throws bowling balls, though...
Actually, T.J., I'm calling it. If you'd be glad to sprite for me, I'd be glad to have to as a spriter. You're in. =)
===
JUST 'CAUSE T.J.'S IN, THAT DOESN'T MEAN I DON'T NEED MORE.
Just in case Life decides to treat an accepted spriter like crap, I know I'll need more than one spriter, so, please keep your samples coming if you're interested. There's still no deadline, but, still, the sooner, the better.
...also, bumpity, since this is in a new section, now.
@TheDoc : Ah, HERE it is. I was wondering where this went. Since there's no actual RPing done in this thread, I figured it'd be best left in the General section. :P
It was a borderline thing, so I thought. Sorry. x)
@Tobyjoey : You know I'm gonna call it Bowl Man, right? xD
I do wonder how he throws bowling balls, though...
Actually, T.J., I'm calling it. If you'd be glad to sprite for me, I'd be glad to have to as a spriter. You're in. =)
===
JUST 'CAUSE T.J.'S IN, THAT DOESN'T MEAN I DON'T NEED MORE.
Just in case Life decides to treat an accepted spriter like crap, I know I'll need more than one spriter, so, please keep your samples coming if you're interested. There's still no deadline, but, still, the sooner, the better.
...also, bumpity, since this is in a new section, now.
Musical
Musical
15,225,883 BP
14 TP |
796 PP
Posted on August 31st, 2015 at 9:34pm
Edited on 2015/08/31 at 9:41pm
Posted 2015/08/31 at 9:34pm
Edited 2015/08/31 at 9:41pm
#14
I decided to make a Lark Man (and Theatre Man) Sprite based off a drawing I made a while ago, I tried to make them closest as I can to the MM Sprite style, Boss said they're more akin to Earthbound though, so I still have to work on it
Mikey76500
Mikey76500
0 BP
0 TP |
0 PP
Posted on September 2nd, 2015 at 7:31am
Posted 2015/09/02 at 7:31am
#15
@MusicalKitty : Boss has a bit of a point, what with them directly facing the 4th wall. They're REALLY small, too.
Musical
Musical
15,225,883 BP
14 TP |
796 PP
Posted on September 6th, 2015 at 1:49am
Posted 2015/09/06 at 1:49am
#16
Better get this out of the way before I accidentally lose the file,
I liked your idea of Blossom Woman's design being based of a Cherry Blossom, so I added "hair" that looks like a Cherry Blossom, and instead of vines spouting from her shoulders (like I first intended) I added Branches with Blossoms at the end, I got her not facing the 4th wall, so that's a start.
I liked your idea of Blossom Woman's design being based of a Cherry Blossom, so I added "hair" that looks like a Cherry Blossom, and instead of vines spouting from her shoulders (like I first intended) I added Branches with Blossoms at the end, I got her not facing the 4th wall, so that's a start.
- comments disabled -
MMRPG Prototype v3.8.25 by Ageman20XX
| Mega Man Trademarks & Characters
© Capcom 1986 - 2024
This fangame was created by Adrian Marceau and his team. It is not affiliated with or endorsed by Capcom.
« Back to Home | Cookie Policy | Data API | Contact & Feedback | Play the Prototype »
This fangame was created by Adrian Marceau and his team. It is not affiliated with or endorsed by Capcom.
« Back to Home | Cookie Policy | Data API | Contact & Feedback | Play the Prototype »
36 Comments